Passive 1-Way Spikes

Passive 1-Way Spike System

Passive Spikes 1For lower security applications, surface mounted passive 1-way spikes can be installed which incorporate spring loaded spikes that are depressed and lowered by the movement and weight of the car as it passes in the correct direction. Any attempt to pass over the spikes in the wrong direction will result in multiple tire punctures. The spikes can incorporate an optional screw mechanism to allow them to be manually locked in the down position to temporarily enable vehicles to pass in the wrong direction.

Passive Spike

These spikes are cost effective way of securing exit lanes where the complexity and extra investment in gates or barriers cannot be justified. This barrier is often used at the exit to parking lots, factories, malls and other areas of heavy traffic. It is particularly effective where high rates of exit traffic are found since it has a minimal effect on traffic flows.

Offered in both a regular version for cars and a heavy duty version (S2800) for use where heavy vehicles form most of the traffic, the spikes are highly effective and simple to install and maintain.

The S2000 model is a spring loaded one-way model. The S2200 model offers an option to lock the spikes in the down position thereby temporarily allowing traffic to pass both ways over the spikes.

 

 
Code Mechanism Foundations Material Tooth thickness Height Width Length
S2000 Manual, spring loaded None - Surface mounted Galvanized steel 18 mm 105 mm 230 mm 900 mm
S2200 Manual, spring loaded with locking option None - Surface mounted Galvanized steel 18 mm 105 mm 230 mm 900 mm
S2800 Heavy Duty, manual, spring loaded None - Surface mounted Galvanized steel 18 mm 105 mm 450 mm 910 mm
  • The passive spikes incorporate a spring-loaded mechanism requiring little or no maintenance.
  • The spikes are surface mounted and can be installed simply and quickly.
 
  • - -
  • Should be Empty: